A friend of mine put together a video walkthrough of the whole air suspension system - it's great!
https://www.youtube.com/watch?v=pQXKztZb35w
Air suspension video walkthrough
Re: Air suspension video walkthrough
Nice! Great share.
I am working through an imbalance in my suspension height. It does not seem like a leak, because it holds air fine. Passenger side is about 1.5 inches lower.
I am working through an imbalance in my suspension height. It does not seem like a leak, because it holds air fine. Passenger side is about 1.5 inches lower.
1997 Toyota Century - Eternal Black <202> - Seiko Clock
Re: Air suspension video walkthrough
That sounds a lot like a ride height sensor.
Re: Air suspension video walkthrough
That's what i'm thinking.
The front is only off balance by less than .5 inches.
The rear is constantly off by 1.5 inches or more.
I changed both rear sensor units, but no change.
Currently working on changing the fronts.
I changed the compressor and both valve units.
What else could it be?
The front is only off balance by less than .5 inches.
The rear is constantly off by 1.5 inches or more.
I changed both rear sensor units, but no change.
Currently working on changing the fronts.
I changed the compressor and both valve units.
What else could it be?
1997 Toyota Century - Eternal Black <202> - Seiko Clock
Re: Air suspension video walkthrough
Great news!
Changed both front height sensors and it's fixed!
Now I just need to do a fine adjustments so it will sit level across all 4.
Changed both front height sensors and it's fixed!
Now I just need to do a fine adjustments so it will sit level across all 4.
1997 Toyota Century - Eternal Black <202> - Seiko Clock